GReddy 12034608 Oil Cooler Kits

GReddy 12034608 Oil Cooler Kits Reviews

Other Picture

(VIII IX - 13 ROW - Works w/ Std cooler) Built for the Mitsubishi EVO... GReddy / GREX Oil Cooler Kits help prolong the life of your oil and in turn your internal engine components. Hard driving causes higher engine temperatures. Factory oil coolers are normally small water-cooled devices sandwiched between the oil filter and engine block. These tax the cooling system even under normal driving conditions. GReddy / GREX oil coolers are an excellent addition, and are especially effective in harsh driving environments. By using a similar inner-fin core design as their famous intercoolers, they are able to increase oil capacity, decrease oil temperatures, and extend engine and oil life. These systems also offer an internal (or external) thermostat to allow for quick engine warm up. The efficient core and durable steel-braided lines ensure good flow and a leak free installation.

Visit Store Now !!

Detail Products

Detail Reviews

May 30, 2011 11:07:04

Derale 13252: Fluid Cooler, Transmission, Heat Sink, Aluminum, Natural, 3 in. x 18 in. x 3 in., Each

Derale 13252: Fluid Cooler, Transmission, Heat Sink, Aluminum, Natural, 3 in. x 18 in. x 3 in., Each Reviews

Other Picture

Fluid Cooler, Transmission, Heat Sink, Aluminum, Natural, 3 in. x 18 in. x 3 in., Each --- ** Overall Height (in): 3.000 in. ** Overall Width (in): 18.000 in. ** Overall Thickness (in): 3.000 in. ** Cooler Construction: Heat sink ** Cooler Material: Alumi

Visit Store Now !!

Detail Products

Detail Reviews

May 29, 2011 15:59:05

Sopus Products/Lubrication 3312 Automatic Transmission Fluid (Pack of 12)

Sopus Products/Lubrication 3312 Automatic Transmission Fluid (Pack of 12) Reviews

Other Picture

Pennzoil DEXRON III MERCON is a petroleum based fluid for automatic and powershift transmissions. It is fully qualified as both a DEXRON III and MERCON lubricant and meets General Motors specification 6417 M and Ford specification M2C185A. Also approved Allison C 4 fluid and is qualified as a Caterpillar To 2 lubricant. Formulated specially for anti shudder by allowing electronically controlled torque converter clutches to operate shudder free. With a high viscosity index that helps it keep its body, this fluid assures rapid flow throughout the transmission and helps prevent wear on moving parts.

Visit Store Now !!

Detail Products

Detail Reviews

May 28, 2011 11:59:08

Derale 52506 25 Row Core Stacked Plate Cooler Kit

Derale 52506 25 Row Core Stacked Plate Cooler Kit Reviews

Other Picture

Derale 52506 25 Row Core Stacked Plate Cooler Kit Feature

• Designed for engine and transmission cooling
• Most efficient heat exchangers available
• Furnace brazed aluminum construction with 4 integrated mounting brackets
• 25 row cooler design

Derale's most efficient heat exchanger, the all aluminum 25 row Stacked Plate cooler features sturdy furnace brazed construction, full 2 inch deep turbulator-equipped plates and a black powder coat finish. With minimal pressure drop it can be used for engine, transmission or fuel cooling. Includes bright aluminum anodized finished -6AN male adapter fittings.

Visit Store Now !!

Detail Products

Detail Reviews

May 27, 2011 13:56:04

1994 Kawasaki ZX11 ZX 11 D Ninja Oil Cooler

1994 Kawasaki ZX11 ZX 11 D Ninja Oil Cooler Reviews

Other Picture

1994 Kawasaki ZX11 ZX 11 D Ninja Oil Cooler Feature

• Motorcycle Oil Coolers are either configured as a radiator style cooler with cooling fins, or an intercooler that fits between the engine block and the spin on oil filter. In either case, the Oil Cooler increases the engines ability to dissipate heat.
• This item will be straight and will not leak. Due to the location of this part on the bike, cosmetic imperfections are considered normal wear, but will not effect the performance of the part.
• Sample Picture of Oil Cooler Shown, not necessarily the Oil Cooler for your bike. You will be shipped the correct part for a 1994 Kawasaki ZX11 ZX 11 D Ninja
• Click here to see other parts for your motorcycle
• Kawasaki Model Identification Note: On all Kawasaki models produced after 1980, the 7th digit of your motorcycle's VIN (it is a letter) is critical in identifying the model of motorcycle you own. For example, if you own a 2000 ZX6, and the 7th digit of the VIN is an E, then you own a 2000 ZX6 E; If you own a 2001 Vulcan 1500, and the 7th digit of the VIN is a G, then you own a 2001 Vulcan 1500 G. Please confirm the 7th digit of your VIN number before placing your order.

1994 Kawasaki ZX11 ZX 11 D Ninja Oil Cooler

Motorcycle Oil Coolers are either configured as a radiator style cooler with cooling fins, or an intercooler that fits between the engine block and the spin on oil filter. In either case, the Oil Cooler increases the engines ability to dissipate heat. The Condition of this part is Used.

This item will be straight and will not leak. Due to the location of this part on the bike, cosmetic imperfections are considered normal wear, but will not effect the performance of the part.

Click here to see other parts for your motorcycle

Visit Store Now !!

Detail Products

Detail Reviews

May 26, 2011 16:54:14

Red Line MTL Manual Transmission Oil- Pack of 4 Quarts

Red Line MTL Manual Transmission Oil- Pack of 4 Quarts Reviews

Other Picture

Red Line MTL Manual Transmission Oil- Pack of 4 Quarts Feature

• Popular manual transmision fluid for BMW (before 1993), Honda and Acura, Ford Focus, late-model Mini Cooper, Dodge & Jeep NV 1500, NV 3500, and NV 5600
• Offers quicker shifts, perfect synchronizer coefficient of friction
• Eliminates notchy shifting, even when cold
• High performance gear protection and longer synchro life
• Recommended for GL-1, GL-3, and GL-4 applications, as well as where most special synchromesh fluids are specified

ABOUT RED LINE GEAR OIL FOR MANUAL TRANSMISSIONS Appropriate coefficient of friction for most manual transmission synchronizers (other's synthetic gear oils are often too slippery for proper synchro engagement) Red Line offers lubricants to pinpoint nearly every transmission application MTL are not for use in differentials with hypoid gears Excellent gear and synchro protection, balanced slipperiness for easier shifting in cold climates Excellent for high- and low-mile transmissions Compatible with petroleums and other synthetics

Visit Store Now !!

Detail Products

Detail Reviews

May 25, 2011 06:16:04

Derale 13212 Power Steering Cooler Kit

Derale 13212 Power Steering Cooler Kit Reviews

Other Picture

Derale 13212 Power Steering Cooler Kit Feature

• Extends pump and seal life
• Reduces heat related pump failure
• 1/2 inch copper tubing expanded into aluminum cooling fins
• 11/32 inch hose barb inlets

This four-pass Tube and Fin power steering cooler uses 1/2 inch copper tubing expanded into aluminum cooling fins to extend pump and seal life and improve steering performance. Feature 11/32 inch hose barb inlets.

Visit Store Now !!

Detail Products

Detail Reviews

May 24, 2011 03:45:04

SST Oil Cooler Hose

SST Oil Cooler Hose Reviews

Other Picture

SST Oil Cooler Hose Feature

• Engine Oil Cooler Hose Assembly

SST Oil Cooler Hose - Reqs (1) KRC 1160 & (1) CAC 5118 seal; 1982-1987 Jaguar Vanden Plas; 1982 Jaguar XJ6, L6 4.2L; 1983-1986 Jaguar XJ6; 1986 Jaguar XJ6; 1986 Jaguar XJ6 Sovereign; 1987 Jaguar XJ6, L6 4.2L

Visit Store Now !!

Detail Products

Detail Reviews

May 22, 2011 22:00:03

Circuit Sports Coolant Breather Tank

Circuit Sports Coolant Breather Tank Reviews

Other Picture

Universal breather tank, comes with 1.1bar high pressure cap. Works for all Japanese make and model engine setups. Benefit of thsi coolant breather tahnk is to bleed out excessive air bubbles trapped inside the engine coolant system and provide consistent temperature reading and stable engine performance while driving.

Visit Store Now !!

Detail Products

Detail Reviews

May 21, 2011 13:01:11

1991 Kawasaki ZX7 ZX 7 J Ninja Oil Cooler

1991 Kawasaki ZX7 ZX 7 J Ninja Oil Cooler Reviews

Other Picture

1991 Kawasaki ZX7 ZX 7 J Ninja Oil Cooler Feature

• Motorcycle Oil Coolers are either configured as a radiator style cooler with cooling fins, or an intercooler that fits between the engine block and the spin on oil filter. In either case, the Oil Cooler increases the engines ability to dissipate heat.
• This item will be straight and will not leak. Due to the location of this part on the bike, cosmetic imperfections are considered normal wear, but will not effect the performance of the part.
• Sample Picture of Oil Cooler Shown, not necessarily the Oil Cooler for your bike. You will be shipped the correct part for a 1991 Kawasaki ZX7 ZX 7 J Ninja
• Click here to see other parts for your motorcycle
• Kawasaki Model Identification Note: On all Kawasaki models produced after 1980, the 7th digit of your motorcycle's VIN (it is a letter) is critical in identifying the model of motorcycle you own. For example, if you own a 2000 ZX6, and the 7th digit of the VIN is an E, then you own a 2000 ZX6 E; If you own a 2001 Vulcan 1500, and the 7th digit of the VIN is a G, then you own a 2001 Vulcan 1500 G. Please confirm the 7th digit of your VIN number before placing your order.

1991 Kawasaki ZX7 ZX 7 J Ninja Oil Cooler

Motorcycle Oil Coolers are either configured as a radiator style cooler with cooling fins, or an intercooler that fits between the engine block and the spin on oil filter. In either case, the Oil Cooler increases the engines ability to dissipate heat. The Condition of this part is Used.

This item will be straight and will not leak. Due to the location of this part on the bike, cosmetic imperfections are considered normal wear, but will not effect the performance of the part.

Click here to see other parts for your motorcycle

Visit Store Now !!

Detail Products

Detail Reviews

May 20, 2011 14:18:05

1992 Suzuki VS 1400 GLP Intruder - S83 Oil Cooler

1992 Suzuki VS 1400 GLP Intruder - S83 Oil Cooler Reviews

Other Picture

1992 Suzuki VS 1400 GLP Intruder - S83 Oil Cooler Feature

• Motorcycle Oil Coolers are either configured as a radiator style cooler with cooling fins, or an intercooler that fits between the engine block and the spin on oil filter. In either case, the Oil Cooler increases the engines ability to dissipate heat.
• This item will be straight and will not leak. Due to the location of this part on the bike, cosmetic imperfections are considered normal wear, but will not effect the performance of the part.
• Sample Picture of Oil Cooler Shown, not necessarily the Oil Cooler for your bike. You will be shipped the correct part for a 1992 Suzuki VS 1400 GLP Intruder - S83
• Click here to see other parts for your motorcycle

1992 Suzuki VS 1400 GLP Intruder - S83 Oil Cooler

Motorcycle Oil Coolers are either configured as a radiator style cooler with cooling fins, or an intercooler that fits between the engine block and the spin on oil filter. In either case, the Oil Cooler increases the engines ability to dissipate heat. The Condition of this part is Used.

This item will be straight and will not leak. Due to the location of this part on the bike, cosmetic imperfections are considered normal wear, but will not effect the performance of the part.

Click here to see other parts for your motorcycle

Visit Store Now !!

Detail Products

Detail Reviews

May 19, 2011 17:10:06

Joe Gibbs 01207 Synthetic Manual Transmission Fluid - 1 Quart Bottle, Pack of 12

Joe Gibbs 01207 Synthetic Manual Transmission Fluid - 1 Quart Bottle, Pack of 12 Reviews

Other Picture

Joe Gibbs 01207 Synthetic Manual Transmission Fluid - 1 Quart Bottle, Pack of 12 Feature

• PSF is a fully synthetic power steering fluid
• Offers high temperature foam resistance
• Lowers power steering system temperatures
• It improves steering response
• Excellent thermal stability for consistent system pressure

The pursuit of increased power output and durability does not end at the flywheel. The engineering staff at Joe Gibbs racing looks for every possible advantage, and Joe Gibbs driven lubricants deliver measurable performance gains in transmissions, rear gears, and power steering systems.

Visit Store Now !!

Detail Products

Detail Reviews

May 18, 2011 22:05:04

Derale 12213 Dyno-Cool Power Steering Cooler Kit

Derale 12213 Dyno-Cool Power Steering Cooler Kit Reviews

Other Picture

Derale 12213 Dyno-Cool Power Steering Cooler Kit Feature

• Extends pump and seal life
• Reduces heat related pump failure
• All aluminum cooler construction
• 1/2 inch aluminum tubing expanded into aluminum cooling fins

These all aluminum coolers are a perfect addition to today's hotter running cars and trucks and help keep under hood ambient temperatures from overheating your power steering pump to extend service life and maintain steering feel and performance.

Visit Store Now !!

Detail Products

Detail Reviews

May 18, 2011 01:36:04